factory amp bypass (my way - lots of pics)

[tim eh?]

Well I'm honestly quite pleased this worked. Originally I tried to rewire the factory amp so my aftermarket head unit could run through the factory speakers unhindered (and also to confirm I had a blown speaker), but I trashed the amp in the process and it became necessary for me to make new crossovers out of the ones from the factory amp. Here's how...

These are the factory crossovers, they consist of coils and capacitors which work as high and low pass filters.


1. Remove the coils and capacitors from the circuit board (which for me was already in pieces).



2. I had to trace the circuits back through the circuitboard to figure out which was what. Once I managed that I drew myself a little diagram.