I like this trick!
Originally Posted by
joshua43214
Here is a trick I have used many times that actualy works. Get a couple of cans of brake clean, make sure you get the kind that have a straw. its important you use stuff that leaves no residue. keep spraying it up in th ehole and use compressed air to clear it out, make sure its totaly clean and oil free. Take a long bolt or metal rod and grind it to a flat point about 3/32 accross. Get some high quality instant adhesive from a hobby store, the super market stuff is junk. Get thick slow drying stuff. put a drop in the bolt and hold it in there for about 5 minutes. dont woble it or shift it. prop it up on something if needed. as long as the threaded portion doesnt have a spur or over stretched threads, it will unscrew with a bit of care.
I know it sounds really goofy, but I have done this countless times when I worked on Saabs, and have since used in on many other vehicles.
95 E34 530I V2.37
===========
Those who make peaceful revolution impossible will make violent revolution inevitable.
John F. Kennedy