i just replaced all my speakers and headunit and re-wired everything!! previous owner apparently was no good wiring and blew everything. and experimented with hard-wiring...but i would stick with OEM location, less hassle, more convienience
jeff
i just replaced all my speakers and headunit and re-wired everything!! previous owner apparently was no good wiring and blew everything. and experimented with hard-wiring...but i would stick with OEM location, less hassle, more convienience
jeff
![]()
F/A-22 maintainance specialists USAF
Tyndall AFB FL
i was able to fit in 6.5" oversized speakers in the back by removing the entire plastic unit and creating a new brace out of plywood that can squeeze in there. it works amazing! if your able to create a full wall between the back of the cone and the front of the speaker, 6.5" speakers can get down to 25hz clean. With the way that the cone loads in the back all the way through behind the seat, it essentially makes a huge, clean resonance chamber.
Wow!!! What 6.5" speakers are those? I haven't come across any with an FR of below 50Hz.
Thanks to everybody! I think I 'm going to use the original cases ans maybe later to put a sub in the trunk.