lol... can't get the factory wheel chalk back in place.pics

[RIPN RAY]

the factory wheel chalk has been out of the car for a while. when i first got the car i was leaving it in my sloped drive way because my brake didn't work. now the e-brake works and it's time to put it back in. but i can't seem to put it in correctly. in the postion that it's in in th pics i can't get the cover to set properly over it.





the thing is bent a little but shouldn't be enough to effect anything...or is it bent the wrong way??

[IMG]http://groups.msn.com/_Secure/0RwAjA!AS83IsDTMu064boNDskwv3RKy*U6HvpQgGudrrrgBHL Wfnflbf27AWfcF0Rw0LY9CIjnElkK2cSDoQyYyNMITsBNtFlqM 4!GonKuM/P1040110.JPG?dc=4675507628312838176[/IMG]

[Kalevera]

Whoa!! so that's what that thing is for?! it's a wheel chock!! I never knew I had one of those -- I learn things about this car daily...

[RIPN RAY]

this position seems to work better, but, it's nothing like the manual pictures...




also, if anyone would like to tell me what i'm doing wrong when posting pics that would be great.

[DanDombrowski]

Ha! Me neither! That's another 1/3 lb I can lose when going to the track now.

[Javier]

and click the Manage Attachments button. It allows you to browse for the picture in your computer. There is a size limit of 39.1K so if your file is larger, you should size it down first.

I'll take and post this afternoon a picture of the trunk content arrangement so you can compare.

Javier

[RIPN RAY]

I posted both pictures, yours, and mine, so you can easily compare. I think yours is more than “bent a little“, or quite different from mine.

Javier

can't see anything

[Javier]

I posted both pictures, yours, and mine, so you can easily compare. I think yours is more than “bent a little“, or quite different from mine.

May be the links will work as the pictures are there hidden!!!!

http://www.bimmer.info/forum/attachm...ntid=765&stc=1
http://www.bimmer.info/forum/attachm...ntid=766&stc=1

Javier

[RIPN RAY]

yup it was definitly bent more then a little, must have been run over... took out a hammer and bent it back so it fits.

thanks again.