on my 540i/a.
thanks
tim s.
Major Contributor
do i need spacers to use style 9 e31 rims.......
on my 540i/a.
thanks
tim s.
Major Contributor
please anybody?
could someone please point me in the right direction for this info?
thanks
tim s.
Green Beret Special Ops
Idonno
havent found anything on that combo yet...anywhere...lol
95 E34 530I V2.37
===========
Those who make peaceful revolution impossible will make violent revolution inevitable.
John F. Kennedy
Major Contributor
check out the link....
they list the bmw offset
http://www.leightyres.co.uk/catalog/fitment.php
tim s.
Grand Master
If you are running E-31 turbines which a few members have on this board up to a 245mm tire width...which is a bit too tight in front... you should be fine...and need no spacers. Believe the offset for the E-31 stock wheels is around 13mm or so and a bit wider than stock E-34 wheels so about right. A decent setup would be to run 235 all the way around.
HTH,
George
P.S. Tim that guide you link is pretty crude for BMW offsets...and not wheel specific which matters a lot.
Last edited by George M; 12-09-2004 at 07:42 PM.
Major Contributor
thanks .....
http://www.kalach.easynet.be/bmw_wheels.htm
i am looking at style #9's.
thanks
tim s.
Last edited by tim s; 12-09-2004 at 07:54 PM.
Major Contributor
I'm with George on this one, care is required...Leigh doesn't show my stock ET18/22 fitment on OEM #5's in their chart...Originally Posted by George M
Major Contributor
I believe the E31 wheels use the same bolt pattern as the E34. In fact, many 850i/850CSi guys run the M5 parallels. Stock wheel for the 850CSi is 17"x8" ET13 and 17"x9" ET19. Not sure if the #9 were 16" or 17"...if 16" they still probably have similar offsets to the 17" wheels (13mm front, 19mm rear).
Hope that helps...
Cheers,
Duey
Major Contributor
is this a turbine?
Grand Master
That's the E31 Turbine...details
They are a straight bolt on to the E34, no spacers required. The offset is an ET15 vs. the ET20 for the stock rims.
Biggest tire you can comfortably get is the 225/55/r16. Micah had some 245 fat daddys and didn't have good results.
I have the RD sways and the tires will rub the front bar when at full lock. I just try not to do this.
It's a nice rim if you can find a good set. Forged. Easy to clean. The 16" rim gives a nice ride. I have 2 sets I like 'em so much!
Cheers!
Jeff
Bellevue WA
90 535iM - not much stock remains. 3.7 liters, ported head, cammed, 3.73 diffy, M5 brakes, MAFed, yadda yadda yadda
86 Porsche 951 - Track Toy
Posting Permissions
Reply With Quote
