Lowered car - height issues

[632 Regal]

Loosen the bolt on the cross tube, unbolt the rear sway bar, spin the sway bar mounts out of the way, re-torque the cross tube and then torque the bushing pre-loaded. Then just reverse everything and ba-da-boom-ba-da-big your'e done.......A total pain in the ass, but that's the only way I could get a wrench on the back side of the bushing.

[Cobra]

Hey guys,

The rears went together and are the same height, but not the front.

Thanks!

This doesn't sound right. If your FR side is lower, then your RL should be slightly higher. You may want to double check the rear to make sure your RL is not "jacking" the car up and hence lowering the FR. Also, ensure that your tire pressures are absolutely exact.

Take care,
Dan

[Hypr5]

Thanks for the tip, tire pressure is 1 lower on the high side. Also the rears are IDENTICAL height. I'm just going to kick my car. lol