Always something we can learn.
Originally Posted by Russell
after the 4th or 5th time its pretty broken in and I can change a chip in 5 minutes from the time I pop the hood.
95 E34 530I V2.37
===========
Those who make peaceful revolution impossible will make violent revolution inevitable.
John F. Kennedy
Always something we can learn.
Originally Posted by Russell
over two days (really!!) before I finally got the boards separated in my 1991 525i. I did not know there was any way to change the chips without getting the boards apart.
Originally Posted by all2kool
I couldnt get the top board to pull out of the plug, so I just lifted the rearward part of the board up as far as it would go. Then I went in with a tiny screwdriver to lift the old chip up and then fished the new chip in with hemostats (roach clip) and pressed it down carefully. It is much easier after you break all the clips and it almost falls apart.
95 E34 530I V2.37
===========
Those who make peaceful revolution impossible will make violent revolution inevitable.
John F. Kennedy
Thanks guys - I don't feel so bad now knowing that others were unable to separate the boards. Once you spread the boards apart to the max, putting the chip in wasn't really that hard.