hi, i need to know the specific value of torque that is messured in Kg or degrees. I dont know how is the conversion.
Any suggestions about putting back the head, and those details such as cleaning the block holes would be appreciated.
Thanks again.
1995 540iA M-Sport - 76k miles. 1 of 1 auto AW3 cars.
1995 540i/6 - Misc Parts donor for above.
thanks, but i need the specific torque value. Useful link!!
m20s and m50s on the head bolts are, 1st stage 22 foot pounds, 2nd stage 90* (1/4 turn), 3rd stage 90*, start from the center of the head and work out in a cross pattern, on m50s the 3 little inverted torx that go into the timming cover through the head are 89 inch pounds (id cut that in half and do it in two stages), but a 89 should be a m20 sohc motor and not the c m50
all america wants is cold beer warm cat and a place to take a poop with a door on it