With the my recent turbo install on my M50, the car doesn't like to accelerate past like 3000rpms or so, it chjanges every now and then. It isn't running lean but is running like it isn't getting any more fuel to goto higher revs. It is only doing it under load. It revs fine will im in nuetral. Now with the turbo i put new injectors and an adjustable FPR. Could either of these be bad. I'v noticed that sometimes when it happens my FPR is running way too high, so i back off of it and it seems fine for awhile and it starts up again. The car ran fine with the stock injectors with the new FPR, but now with the new injectors it is starting. This weekend im gonna take the intake piping off the turbo and see if it will run fine NA, but that doesn't seem to be the problem. I took the vacuum line off of the FPR because i noticed under boost it drops the pressure, but the same problem occured. So i am guessing the injectors are bad. Any suggestions would be appreciated. I hope its not the injectors cause then ill have to run NA till i get new ones cause of detination