OK ok before you start to say it's the upper thrust bushing, it should'nt be because a replaced those at 120k (with poly offset bushings from BMA). Now the ole girl's got 158k and rides like a dream until the road gets a little rough. Then she starts to shake the front end. It does it about at any speed the fast the more pronouced. I'm thinking it's about time for shocks, springs, lower control arm bushings, sway bar bushings, idler arm, center tie rod and tie rod ends. After doing a little research and alot of reading on this great board I thinking of going with the BMA spring/ Boge or Koni shock setup. Any of you got a set of BMA springs for sale? Is there any other cause for the head shake the ole girls got that I'm overlooking, or other parts I need to replace? After adding all the new parts up so far it's about 1100 for the parts alone.. The car is currently running stock 16" baskets. Only thing not stock is the Turner Chip and the K+N dropin filter.


ScottM

Parts replaced already since getting the car.
All Coils and the main brain at 90K ( damn #1 coil melted and blew the brain so I replaced all coils)
Sword@90k
Chipped and K+N@90k
Upper thrust bearing@120k
FlexDisk@120k
Radiator@ 120k

Tires/ brakes... You have to have them.