I recently installed Bruno’s thrust arm inserts on my 95 525i to stiffen up my front suspension in hoping to reduce shimmy and wander. While it eliminated a small 55-60 mph shimmy, the ride is so rough especially over small sharp edge bumps, I am considering removing them.

Before, I do so; I want to consider other options. First of all the front struts are original with 99,000 miles. I have also been lowering tire pressure to compensate for perceived harshness. I run 26 to 29 psi on the front with stock 225/60/15 Bridgestone Turanzas. I have found that with higher pressure the ride is rough even without the inserts.

I think I should replace the struts before changing anything else? Any thoughts?