GO FISHING, use SLABSAUCE Fishing Attractant
Page 3 of 5 FirstFirst 12345 LastLast
Results 21 to 30 of 41

Thread: Stripping clear off M-Parallels post 2022

  1. #21
    Join Date
    Dec 2003
    Location
    Eastern Tennessee USi
    Posts
    14,843

    Default

    A second redo cause I didn't like the finish of the rear wheels. The front wheels with the extraterrestrial clear finish, the aluminum is softer than on the rear wheels. The fronts wheeled out okay but the rears still wont polish up past the 2000 grit. So after respraying with the rest of the Wurth paint I can try try again or say... can't say here but the point is I am very fatigued of it all. The fronts are very shiney for sure, not mirror but close. The rears suck in comparison. I did upload a bunch of pictures but am unable to post them right now. Just don'e want to get into that part. I am thinking 3000, 4000 and 5000 grit actually has a purpose now. Not going to do it to the rears but I bet that is whats missing. The clear paint does not hide any sand or wheel scratches at all. If your wheel shows sanding then after clear you will see them. Why did I bother?
    95 E34 530I V2.37
    ===========
    Those who make peaceful revolution impossible will make violent revolution inevitable.

    John F. Kennedy

  2. #22
    Join Date
    Dec 2003
    Location
    Eastern Tennessee USi
    Posts
    14,843

    Default

    Pictures... Notice the width of the spokes and the edge where it blends into the barrel on the rears. Same part number and all. So I attempted to re-clear with a somewhat satisfactory failure but should be workable. Those pics will come later in another post.

    Note: When spraying high solids clear you DO NOT max the flow and use low pressure! Those people telling you that want you to fail, and I did. I didn't figure that out in time but know for next time. Anyways pics in no particular order.

    Name:  IMG_20220427_200607.jpg
Views: 3635
Size:  53.0 KB

    Name:  IMG_20220427_194017.jpg
Views: 3498
Size:  72.7 KB

    Name:  IMG_20220427_194032.jpg
Views: 3476
Size:  72.6 KB

    Name:  IMG_20220427_194044.jpg
Views: 3541
Size:  65.3 KB

    Name:  IMG_20220427_194050.jpg
Views: 3250
Size:  89.3 KB

    Name:  IMG_20220427_194113.jpg
Views: 3289
Size:  99.3 KB

    Name:  IMG_20220427_194119.jpg
Views: 3401
Size:  88.9 KB
    95 E34 530I V2.37
    ===========
    Those who make peaceful revolution impossible will make violent revolution inevitable.

    John F. Kennedy

  3. #23
    Join Date
    Dec 2003
    Location
    Eastern Tennessee USi
    Posts
    14,843

    Default

    Current state of affairs:
    Name:  1652647369897-1709769551.jpg
Views: 3330
Size:  100.3 KB

    I don't want to discuss it.
    95 E34 530I V2.37
    ===========
    Those who make peaceful revolution impossible will make violent revolution inevitable.

    John F. Kennedy

  4. #24
    Join Date
    Dec 2003
    Location
    Eastern Tennessee USi
    Posts
    14,843

    Default

    Redo 3. The clear sucked and looked to be too much BS to sand and wheel so lets do it again I guess. Store stripper works on fresh clear okay. Definitely not great but works. That was 3rd try with stripper. Don't want to waste the real stuff on it yet.

    Thinking I will just pound on some old school Buick hubcaps and call it done. Should have I spent 2500 on mint M-Pars? Not a chance this is much more rewarding.
    95 E34 530I V2.37
    ===========
    Those who make peaceful revolution impossible will make violent revolution inevitable.

    John F. Kennedy

  5. #25
    Join Date
    Dec 2004
    Location
    Sydney, Australia
    Posts
    4,374

    Default

    Quote Originally Posted by 632 Regal View Post
    Redo 3. The clear sucked and looked to be too much BS to sand and wheel so lets do it again I guess. Store stripper works on fresh clear okay. Definitely not great but works. That was 3rd try with stripper. Don't want to waste the real stuff on it yet.

    Thinking I will just pound on some old school Buick hubcaps and call it done. Should have I spent 2500 on mint M-Pars? Not a chance this is much more rewarding.
    Admire your heroic perseverance from afar, the far away continents took years of toil, frustration, and at the end, sheer luck and the ability to overcome waves of pestilence.

    Well done, no way you can stop now. At least they look really super, even if you are not happy with the finish, yet...

    Join the Aussie
    540i LE yahoo forum

    08/88 535i e34 M30+miller MAF, 'stiens, tints & teeth!

  6. #26
    Join Date
    Dec 2003
    Location
    Eastern Tennessee USi
    Posts
    14,843

    Default

    Quote Originally Posted by genphreak View Post
    Admire your heroic perseverance from afar, the far away continents took years of toil, frustration, and at the end, sheer luck and the ability to overcome waves of pestilence.

    Well done, no way you can stop now. At least they look really super, even if you are not happy with the finish, yet...
    I am working on flipping X3's so that took all the room of continuing the effort on these things. It also leaves me a great break to rethink things when I do choose to restart the M-Pars. One is the sanding step. I bought 2000-7000 grit so for the rears that don't polish I have that option of stepping up to at least the 4000 before polishing and clear coating. The clear coat I am using does bond to polished aluminum which is pretty much a rare situation. I like that idea I can get the finish like I want and then clean and clear. As I mentioned in this thread the fronts are a softer material that can be wheeled out for the shine, the rears are much harder finish.

    One of my friends that has been watching my continued efforts told me to just paint them black and be done. Lol... Once I start again I think it will be my final effort no matter how they turn out. They however will be better than the last time which is progress... right?
    95 E34 530I V2.37
    ===========
    Those who make peaceful revolution impossible will make violent revolution inevitable.

    John F. Kennedy

  7. #27
    Join Date
    Dec 2003
    Location
    Eastern Tennessee USi
    Posts
    14,843

    Default

    This post didn't die, just took a break. Probably hit it soon.
    95 E34 530I V2.37
    ===========
    Those who make peaceful revolution impossible will make violent revolution inevitable.

    John F. Kennedy

  8. #28
    Join Date
    Dec 2003
    Location
    Eastern Tennessee USi
    Posts
    14,843

    Default

    Only dealing with the rears that won't polish up. Did 600 and 800. Don't take long but lack of motivation.
    Name:  1661296380057-679647231.jpg
Views: 3106
Size:  90.1 KBName:  1661296480632-686241020.jpg
Views: 3045
Size:  83.8 KB
    95 E34 530I V2.37
    ===========
    Those who make peaceful revolution impossible will make violent revolution inevitable.

    John F. Kennedy

  9. #29
    Join Date
    Dec 2003
    Location
    Eastern Tennessee USi
    Posts
    14,843

    Default

    1500 and 2000 so far. Name:  16642322745891544575492.jpg
Views: 2933
Size:  64.6 KB
    Looks the same or worse, I don't care, my arms hurt.
    Last edited by 632 Regal; 09-26-2022 at 05:51 PM.
    95 E34 530I V2.37
    ===========
    Those who make peaceful revolution impossible will make violent revolution inevitable.

    John F. Kennedy

  10. #30
    Join Date
    May 2004
    Location
    Japan
    Posts
    9,266

    Default

    don't care, just install the wheels, after some thousands of miles there is enough brake dust which covers all this.

Page 3 of 5 FirstFirst 12345 LastLast

Similar Threads

  1. Bad clear coat. Sand off & respray clear only?
    By Gene in NC in forum 5 Series BMW
    Replies: 4
    Last Post: 03-31-2007, 11:42 PM
  2. anyone with the a4s 310r suffer with stripping bolts?
    By ryan roopnarine in forum 5 Series BMW
    Replies: 4
    Last Post: 03-04-2007, 06:04 PM
  3. Replies: 25
    Last Post: 08-03-2006, 07:28 AM
  4. Replies: 4
    Last Post: 04-24-2006, 06:02 AM
  5. Clear Turn Signals - Clear Sides?
    By uscharalph in forum 5 Series BMW
    Replies: 11
    Last Post: 04-15-2005, 06:45 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •