Brembo's

[Tash_1991]

Last question this week i promise!! My wonderful boyfriend came across a set of E38 Brembo calipers and got them for me to put on my E34.... Has anyone that has done this shed some light on fitment etc???


Thanks!!!'

[Tiger]

Lucky you. You will need the E38 mounting brackets Everything fits with no problem. Of course you will have to buy the E38 rotors and pads.

The only problem with this is the brake pedal. I believe people who did this have a low brake pedal height and mushy feeling. I can't remember what was the solution to fix this problem. I think it was to use the master cylinder from E38 or larger one that fits on the E34.

Shogun would know about this.. check out his website. Bruno is supposed to have this on his website but he took it off.

[BigKriss]

were are the e38 mounting brackets sold though?

Lucky you. You will need the E38 mounting brackets Everything fits with no problem. Of course you will have to buy the E38 rotors and pads.

The only problem with this is the brake pedal. I believe people who did this have a low brake pedal height and mushy feeling. I can't remember what was the solution to fix this problem. I think it was to use the master cylinder from E38 or larger one that fits on the E34.

Shogun would know about this.. check out his website. Bruno is supposed to have this on his website but he took it off.

[Tash_1991]

Oh ok, that seems easy enough, bigger master is no issue, as for room in the wheels, iv got 17"s so it should just make it..?

[Tiger]

Yep... you are good with 17".

[shogun]

this will help you
BMW E34 Website

if you want to go for giant rear brakes, here one of our members in Japan installed on his Alpina E32 these, maybe that helps too
ƒŠƒAƒuƒŒ�[ƒL‚Ì‹*‰»
φ３４０x２８
plus steel brake hoses


bookmark the site of Bruno
BMW E34 5 series Website

[BigKriss]

Erich, what front brakes did he put on the car?

this will help you
BMW E34 Website

if you want to go for giant rear brakes, here one of our members in Japan installed on his Alpina E32 these, maybe that helps too
ƒŠƒAƒuƒŒ�[ƒL‚Ì‹*‰»
φ３４０x２８
plus steel brake hoses


bookmark the site of Bruno
BMW E34 5 series Website

[Tash_1991]

Thanks for the info!! Im really keen to get them on, got a track day at wakefield park next month and all my friends think im going to run out of brakes and plough into a tyre wall. A) i use my gears not the pedal and B) ill outstop their fords with these :P

[genphreak]

Brakes are not a weak point on e34. Even stockers can hold heat and are well sized. For tracking larger brakes are better, on yours you can easily put (bolt on) 540 (4mm thicker) brakes without changing master cylinder or changing feel.

That said, 540 rears are also the same diameter, but thicker and vented You get a lot more heat capacity, larger sizes are not needed unless you are going and upping power etc. But you must bleed them with the right procedure/pressure bleeder else it will all be for nought!

[Tash_1991]

Yeh the plan is a Tuuuurrrbbboooo lol it will be tracked regularly and id just like to stop.. Lol caus currently it really isnt doin it!!