Yeah, well I have to get my car back together and see if its doing the same.

The engine fan is fine. Maybe a balance plate is missing but I didn't notice one gone last time I inspected it.

I was speaking to Rastum on here who replaced his own u-joints, he said he had similar symptoms to me. If this doesnt fix it, I will try and get a second hand driveshaft and/or replace the u-joints.

Here are some pics of my progress so far;

https://picasaweb.google.com/Kristia...CIa7sM33gLreLA


Quote Originally Posted by ss2115 View Post
Hi Big Kriss.
I was going to suggest the drive shafts themselves for balance, but i guess thats pretty obvious that you might have done that already. I've known the small plates they weld to drive shafts to break the touch weld and be thrown off.
But another read on another forum reminded me of a problem i encountered many years ago with a strange vibration that would come and go - mainly on acceleration. Check carefully the engine driven fan if your still running it. Missing blade will be obvious and is a constant vibration, but a split or a small missing piece can set up a vibration under load that isn't there at any other time and without going into a long tedious story, almost impossible to identify by most people.
Would be nice if its that simple, and it might be.