GO FISHING, use SLABSAUCE Fishing Attractant
Results 1 to 10 of 15

Thread: Oil light

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Join Date
    Nov 2006
    Location
    Germany
    Posts
    475

    Default

    I thought there was an anti-drainback valve in the oil filter assy...if that was stuck open, then the oil filter housing would be dry in the mornings and cause a long oil light on condition.

    I looked on RealOEM and couldn't find a description for an anti-drainback valve. If memory serves, there have been discussions on this site about this issue.

    Brian

  2. #2
    Join Date
    Jun 2008
    Location
    south africa
    Posts
    70

    Default

    Yes there is a anti drainback valve but is it a good idea to put oil in the filter before replacing the filter what is meant by prime the oil filter i read that.:-)

  3. #3
    Join Date
    Jan 2004
    Location
    Lexington, Kentucky
    Posts
    2,561

    Default

    Don't think the filter has a drainback valve. However, I believe there is one in teh filter housing assembly.
    Thanks,

    1995 525i Auto, M50TU 2.5L, EAT chip, 1/95 build, USA, 205/65/15 tires, ASC+T, HID, lumbar, EC Mirror, BMW Alpine 5 radio with BMW-Pioneer CD Changer, abt 236k miles, Oxford Green/Parchment

  4. #4
    Join Date
    Feb 2004
    Posts
    4,894

    Default

    I only know of the one in V8... Our E34 has a valve built in right into the filter. They later changed that in later model V8... with a black plastic valve... that can be retrofitted into early V8 engine... you simply push it in and use the later model filters.

  5. #5
    Join Date
    Feb 2004
    Posts
    4,894

    Default

    Allerston engine use spin on filters... no alternative. Install a oil pressure gauge to read the actual pressur and then decide what you want to do.

  6. #6
    Join Date
    Sep 2008
    Location
    Gold Coast, Australia
    Posts
    178

    Default

    the m20 uses a spin on filter. no filter housing here.

  7. #7
    Join Date
    Oct 2004
    Location
    Honolulu
    Posts
    3,105

    Default

    Quote Originally Posted by Tiger View Post
    Allerston engine use spin on filters... no alternative. Install a oil pressure gauge to read the actual pressur and then decide what you want to do.
    Exactly!...the M20 uses a spin on filter and the air would be puhed out after installation and remain filled with oil until it is replaced....Remember the oil running down your arm when you take those off?


    Vee ave vays of dealing vid your kind...........

Similar Threads

  1. mounting the light insert with the light housing
    By grave77 in forum 8 Series BMW
    Replies: 2
    Last Post: 10-24-2008, 01:57 PM
  2. abs warning light, pad wear light
    By Lordsneldon in forum 5 Series BMW
    Replies: 1
    Last Post: 05-26-2008, 06:33 PM
  3. Brake Light, Tail Light, Licence Plate warnings
    By leicesterboy15 in forum 5 Series BMW
    Replies: 1
    Last Post: 09-24-2007, 05:01 PM
  4. Parking light bulb = signal light bulb?
    By bigtisas in forum 5 Series BMW
    Replies: 5
    Last Post: 11-06-2006, 11:52 PM
  5. Parking light/reverse light issues
    By cleansdabaffroom in forum 5 Series BMW
    Replies: 3
    Last Post: 01-06-2005, 10:10 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •