GO FISHING, use SLABSAUCE Fishing Attractant
Results 1 to 8 of 8

Thread: Does anyone check carbon deposits with a boroscope?

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Join Date
    Apr 2008
    Location
    Belgium
    Posts
    429

    Default Does anyone check carbon deposits with a boroscope?

    Hello,

    In the past, 2 times I got engine cylinder header problems on my M20, I saw the combustion chambers pretty well and each time, they were loaded with carbon deposits. Valves and pistons.

    Would leaking injectors increase carbon deposits in the combustion chamber?

  2. #2
    Join Date
    Dec 2005
    Posts
    162

    Default

    it may be possible that you are running rich. But as maintenance, you can use valve or injector cleaners (pour in your gas tank) and put auto rx to you oil... give your car an exercise too...
    Last edited by sneekens; 05-14-2010 at 04:08 AM.

  3. #3
    Join Date
    Feb 2006
    Location
    Oldham, England
    Posts
    3,078

    Default

    Using a boroscope sounds like a great idea. I thought they were very expensive? Plugs should give a good indication if its running rich or you have leaking injectors as they would be sooty? Worn valve guides, valve stem oil seals or piston rings could be the culprit. Using much oil or any blue smoke when you fire up or on over-run?

  4. #4
    Join Date
    Jan 2004
    Location
    Benneton (United Colors of)
    Posts
    3,067

    Default

    Quote Originally Posted by whiskychaser View Post
    Using a boroscope sounds like a great idea. I thought they were very expensive? Plugs should give a good indication if its running rich or you have leaking injectors as they would be sooty? Worn valve guides, valve stem oil seals or piston rings could be the culprit. Using much oil or any blue smoke when you fire up or on over-run?
    I know that the conversation is currently between two "europeans", you and mordan, buuuttt....

    cue "America, F*ck yeah" from team america, world police,
    we lead the world in buying cheap chinese crap of questionable durability

    http://www.harborfreight.com/wireles...tor-66550.html

    And it isn't 159, either. I got a coupon for it in the mail a week ago that I just threw away, I think it is closer to the 100$-130 range with the flyer.
    So if you had habitual carbon problems with various vehicles, you could buy one of these setups for way less than a headgasket and be proactive.
    "..Torchinski v. Peterson that it is legal to carry a concealed weapon, so long the weapon is totally slick like a huge ass machine gun that you carry under a trench coat, like in the Matrix."


  5. #5
    Join Date
    Feb 2006
    Location
    Oldham, England
    Posts
    3,078

    Default

    When I had a hard to find leak, my brother took apart a web cam and taped it to the end of a piece of wire. We could see the results full screen on my laptop. I dont think the lens would fit down a plug hole though
    Checked on ebay.uk and prices for boroscopes are £200-£550. Its about time those Harbour Freight guys opened up here.
    My thanks to 'Team America'. Call any time

  6. #6
    Join Date
    Feb 2004
    Posts
    4,894

    Default

    Boroscope is now under $100 on ebay... I think.

  7. #7
    Join Date
    Feb 2004
    Posts
    4,894

    Default

    When is the last time you had your timing belt changed (if you have any). Timing chain stretches also so that would affect the carbon buildup. Leaky injector can cause carbon buildup also as there is too much fuel.

    Try using Lubro Moly Venti Sauber to clean your carbon... let it suck through the vacuum on intake manifold... control the flow until it gets to the end and let it all out that the engine dies on the last drop... or close to it... to completely soak the valves and cylinder carbon.

    You do this when engine is hot and let soak for an hour before you restart... This is what I read long ago... New stuff is similar like seafoam... you let it through the vacuum to do the same job. Yes, it will smoke like hell.

  8. #8
    Join Date
    Apr 2006
    Location
    Chicago, Il. U.S.A.
    Posts
    4,243

    Default

    Water introduced through a vacuum line will remove carbon, so will an "Italian Tune-Up".
    "The gas pedal wouldn't go to the floor if it weren't meant to be there"

Similar Threads

  1. what do you use to manually remove carbon deposits
    By Mordan in forum 5 Series BMW
    Replies: 7
    Last Post: 09-01-2008, 11:32 AM
  2. Brake pad deposits on wheel: dust vs resin?
    By Gene in NC in forum 5 Series BMW
    Replies: 7
    Last Post: 05-11-2008, 11:00 PM
  3. Carbon airbox e34 M5
    By colamangr in forum 5 Series BMW
    Replies: 2
    Last Post: 02-26-2007, 07:35 PM
  4. My carbon fiber E34
    By Jon K in forum 5 Series BMW
    Replies: 23
    Last Post: 09-22-2006, 08:11 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •