riddle me this Batman

[Scott C]

Thought of putting a bushing set in the calipers also. I assume they are available.

For what it is worth - I had an issue that drove me nuts - it was a 55mph wobble/vibration in the steering wheel that was intermittent. Short story is that the caliper piston (not the sliders) was not fully retracting - varnish I assume. This problem caused me to go through 3 sets of control arms in 9 years....

Scott

[ArnZ!]

Here in Australia i can get my rotors machined for $15 a disc. Now of coarse this is okay if your discs still have plenty of meat on them, if not then obviously go with new rotors, I recently picked up some RDA discs for $150 for the pair upfront, no problems what so ever.

I agree with the above comment, if you do feel a shimmy on the brake pedal then its most likely a brake related problem.

They say warped rotors is 99% myth, try re-bedding the pads as apparently its just pad material left on the rotor is thicker in some places which gives you the illusion of warped rotors. Just try re-bedding them and see how you go.