What do we think guys?

Doing the whole flying car impersonation and dropping off the gearbox sump,


The valve body looks clean, no buildup.


The sump looked relatively clean, one or two tiny grey particles in there:

Ignore the clear spots, they're where the snow landed in the pan while I was bringing it into the house to go in the dishwasher...

The magnet had about 3mm of extremely fine, powdery swarf on it, is this normal for a 150k box?


The fluid itself looked brown but reasonably intact, doesnt smell particularly burned, just smelled like old oil!

Now... to mitigate the bollocking I'm going to get for putting that sump through the dishwasher >.<