any tips on removing the zf 4hp22 gearbox?

[BigKriss]

I put the TC back into the tranny, I just kept on turning it clockwise and pushing it in untill it wouldn't go any further. them the bellhousing hooked up to the engine and then finally I put did the 3 bolts that hold onto the flex disc, I used 240 grit wet and dry sandpaper and lightly rub down the TC converter hub. I dont have a pic of that. The engine and trans are now ready to be put back into the car.

Here are some pics;

http://picasaweb.google.com/Kristian...49226774013986

http://picasaweb.google.com/Kristian...49561221780706

http://picasaweb.google.com/Kristian...49680972939730

http://picasaweb.google.com/Kristian...49878506259650

[Mordan]

thx for the picture.

cool to see a good looking engine..

you doing all this work alone?

[BigKriss]

Yes mate I do it all alone with hand tools but when removing or installing the engine I get my dad to help. I think you need at least one other helper and a fre outher helps in keeping things like the wiring out of the way.

thx for the picture.

cool to see a good looking engine..

you doing all this work alone?