Where can I find a CHIP for 1995 525i?

[Unregistered]

I see performance chips for 525i from 1989 to 1994 but why can't I find one for late model 1995? Are the 1995 525i engine slightly different or anything?

[darron525]

I see performance chips for 525i from 1989 to 1994 but why can't I find one for late model 1995? Are the 1995 525i engine slightly different or anything?

try this site eat
i don't have one yet but, alot of the board members have them and recomend them. Have heard very good feedback.l


darron 93/525i

[Unregistered]

Thanks for the info but I already seen this site. They don't have the chip for 1995 525i. They have it for 1994 or older but NOT for 1995 year.

try this site eat
i don't have one yet but, alot of the board members have them and recomend them. Have heard very good feedback.l


darron 93/525i

[Phil M]

EAT chips are the best chips on the market for our engines. If Mark D doesnt have a chip for the 95 525, he definately will soon. Be patient and dont waste your money on anything else because when he comes out with one, you'll wish you had waited. A stock chip is better than an overpriced chip. Well, unless money is no object to you..

my .02

[MarkD]

Thanks for the info but I already seen this site. They don't have the chip for 1995 525i. They have it for 1994 or older but NOT for 1995 year.

I was not able to spend time to find one last piece of the puzzle required to make a generic EWS chip, (cars built after 12/94 have the EWS-II anti-theft system) but I have a solution. I have bought an EPROM reader that is in the USA. I can ship it to anyone that has an EWS chip so you can read it. Then you email me the file for your chip, and I'll make a performance version and mail you a chip with the EWS code for your car. The reader is currently in Texas and will be there for a few more weeks.

The reader is quite easy to use and it takes about 5 minutes to set up and read a chip. (maybe 15 the first time)

Mark

[Kev O'N]

Mark,
Is the Eprom reader a particular type?
I suspect you wouldn't be willing to ship the reader to Ireland

(Any Irish in this forum who own an eprom reader???)

[MarkD]

Mark,
Is the Eprom reader a particular type?
I suspect you wouldn't be willing to ship the reader to Ireland

(Any Irish in this forum who own an eprom reader???)

Any EPROM programmer can read a 27C512 EPROM so it should not be hard to do with any programmer someone may own.

Mark

[biondani]

Mark,

Do your chips work with European models, specifically the UK? I have a 1991 525i (M50 non Vanos) that I would like to get chipped.

Thanks
Ian

[MarkD]

Mark,

Do your chips work with European models, specifically the UK? I have a 1991 525i (M50 non Vanos) that I would like to get chipped.

Thanks
Ian

Hi Ian,
yes my M50 chips work well with the Euro models and I have a few people in the UK using them. There is one DME that I didn't make a chip for as it never came to NA. (0 261 200 400)

If your DME ends in 402, 403 or 405, I have a chip for you.

(The Vanos DME ends in 413 but you don't have that one).

Mark

[Drooby]

Hi Ian,
yes my M50 chips work well with the Euro models and I have a few people in the UK using them. There is one DME that I didn't make a chip for as it never came to NA. (0 261 200 400)

If your DME ends in 402, 403 or 405, I have a chip for you.

(The Vanos DME ends in 413 but you don't have that one).

Mark

Mark,
I sent you an email regarding my car's chip about 3 weeks ago.
Did you by any chance work out a chip for it (95 525 - dme ending 413)
If so I want one - If you can send me the reader and tell me what todo , i'll read my chip for you .

,
Drooby