GO FISHING, use SLABSAUCE Fishing Attractant
Results 1 to 2 of 2

Thread: starter motor disassembled - many pics

  1. #1
    Join Date
    May 2004
    Location
    Japan
    Posts
    9,253

    Default starter motor disassembled - many pics

    http://twrite.org/shogunnew/fixes/st...88_750_starter
    Yesterday we opened up a starter motor from a 10/1988 M70 750 parts car, which we wanted to to check before we stock it for emergency need for one of our shade tree mechanic buddies. It was still working. Much to our surprise the planetary gear was made of plastic instead of metal.
    Turned out that the gear was made in 08/1988, and apparently Bosch/BMW then later changed the gear from plastic to metal.
    planetary gear 12411736763
    old p/n 12411736760
    2.2 kW motor starter 12411711403
    reman Bosch starter p/n from BMW 12411720246

    Anyone knows the part numbers from Bosch for BMW 12411736763 ?
    For the outer toothed rim of the planetary gear I found a shop in Germany, but still have to check the part number.
    For a complete overhaul we want to replace items 6, 9-RS, 10, 12 and 17.
    http://bmwfans.info/original/E32/Lim...2/ill-12_0537/
    The part number of the complete motor starter from Bosch is # 0001218027, produced 08/1988
    When we had removed the planetary gear, it fell into pieces, completely cracked.
    It must be said, that the motor itself was in a very good condition, just needed cleaning, the brushes look like new.
    It will probably be not so easy to get the brushes pushed back when inserting the other parts again, any ideas? The exciter winding has 4 countersunk head screws 12411720439 but the head is very big and we did not have the right tool to get the out with a normal screwdriver, therefore we bought a impact driver set with such big bits. That is for losening screws or nuts. Easy to use, insert a suitable bit into the holder set bit in screw head. Strike/hit end of handle with a hammer and screw will hopefully turn left or right depending on handle adjustment.
    Hope these pics help you to R&R the starter motor, be prepared for surprises when you open it, but apparently the motor and the brushes are not the problem when a motor start stops working.

    Now we have to find a source for the parts.

    We have made a lot of pics which are of interest to you when you want to R&R a motor starter,

  2. #2
    Join Date
    May 2004
    Location
    Japan
    Posts
    9,253

    Default

    I got the Bosch part numbers:

    http://www.pictureupload.de/original...anlasser_1.jpg
    http://www.pictureupload.de/original...anlasser_2.jpg
    see also here
    Wood Auto Supplies Ltd :: 0001218027

    replacement number for BMW 12411736763 is Bosch 0986017160

    Bosch Online-parts catalog
    http://www.bosch-automotive.com/ecat-online

Similar Threads

  1. LAD regulating valve - disassembled - pics
    By shogun in forum 5 Series BMW
    Replies: 5
    Last Post: 09-07-2015, 02:37 AM
  2. E34 540 starter motor
    By Sidney Rough-Diamond in forum 5 Series BMW
    Replies: 1
    Last Post: 02-12-2007, 05:37 PM
  3. Replies: 2
    Last Post: 12-29-2005, 10:54 AM
  4. Heater valves disassembled - pics
    By shogun in forum 5 Series BMW
    Replies: 0
    Last Post: 11-28-2005, 01:35 PM
  5. M20 Starter Motor help
    By 520Ichester in forum 5 Series BMW
    Replies: 2
    Last Post: 04-28-2005, 04:00 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •