Quote Originally Posted by Mr._Graybeard View Post
Maybe this diagram will help. The hoses I referred to are part no. 8.

http://www.realoem.com/bmw/showparts...80&hg=32&fg=20

As Shogun mentioned, the hose connections to the reservoir are also likely points for leaks.
Hello all and thanks for the help and guidance. I wanted to let you all know that I have just finished fixing the leaks. I didnt touch any of the high pressure stuff as it just isnt leaking. It was all the low pressure stuff to and from the cooler. I replaced all the hose's I had and replaced all the factory clamps with good hose clamps. So far so good and for sure its a lot better than it was. It is a lot of work. I removed the grill and drivers side headlight and then moved the cruse control module to make room to get to the clamps. Once it was moved there was a lot more room to get in there and cut off the clamps. I used a hacksaw blade to cut the factory clamps off and replaced with good quality hose clamps. Wow its been a busy weekend and now I have new upper and lower control arms installed, sway bar links installed, rear pitman arms installed, and fixed the leaking power steering hose's. All I have left to do for now is install the new valve cover gaskets and I should be good to go for the first time. Oh yeah this all started because I had to replace the water pump last Thursday lol.
Thanks
Johan