So as I could hear my fan very lightly contacting my upper rad hose at 1,800 RPM I figured it was time to replace the engine mounts before they are bad enough for the fan to totally eat the rad hose.

Have got a new pair of mounts. Anything else I should get to go with the mounts? Am thinking I might pick up new nuts/bolts to go with the new mounts. Probably don't need new hardware, but I like to do that for some odd reason.

And is there a good writeup on doing the mounts for a 540? Bentley says nothing about it. And I found only one writeup here in a search that wasn't written up very well.

Would be nice if someone made some poly mounts for these things...