Clear Corners

[Dvious]

Just ordered my clear corners from Ebay for the 34 front, i just wondering if this is a difficult or easy job, i have looked at the front light housing and it looks like a bit of a job to get into the corners, any idea as too what to remove, i know il have to remove the front grille, any help would be great.

Thanks.

[Mitch90535im]

Corners are removed from under the hood. It's tight, so having a friend with small hands is a plus. No need to remove any other parts.

[Dvious]

Thanks for that, i knew i was meant to remove them from inside the hood but there is a plastic strip along the front where the headlights are and i have no idea how to get into the corner, do i just unscrew some screws and then push the lights forward out the front of the car? Sorry to bother i just don't want to have to unscrew half the car and do it wrong....

[RallyD]

when you get the new lights just look at where the holes are. then you'll know where to look. A stubby phillips and a regular #2 phillips screwdriver will make it easier. 2 screws into side of headlamp assy. One screw towards the rear

[Frzninvt]

Just did this yesterday, I used a skewdriver and it made easy work of the two screws facing the front of the car. The one on the 1/4 panel can be removed with a standard phillips. Just remove the plastic panel that provides access to the headlights by removing the two plastic twist-loc screws (twist a half turn and remove). Once removed you will see the screws you need to remove, tricky getting in there and I have big hands. Driver's side is harder because you have the PS resovior in way, I had to remove the 1/4 screw by feel since I could not see it. The skewdriver really makes a difference on the other screws. It was not too bad a job I got the Euro light smoke ones with the internal amber reflector.