Windshield washer jet alignment

[Claude]

The angle of the arm will affect how well it wipes also. It's a simple matter of bending the arm to adjust it's angle relative to the glass.
Shogun posted about this recently with the angle specification given.

I adjusted the aiming point of jets on the windshield according to Myles spec's post above that make a good improvement.

I found out that tread from Shogun for the wiper arm (the blade) angle on the windshield http://www.bimmernut.com/forum/showt...ight=wiper+arm but related pictures are no longer available those was supposed to show i supposed the direction of this angle (84 deg) on the windshield and also the tool and/or the way to twist the arm... Have any hints about that ?

[myles]

This is all I can see in my stuff. I don't think it is much use without the special tool.

[Claude]

This is all I can see in my stuff. I don't think it is much use without the special tool.

Thanks. The angle of the blade to the windshield should be 87 deg (instead of 90) do you know in what direction (bend the arm in what direction) ?