Originally Posted by
shogun
That could be an explanation, see the different locations of large and small holes and small holes
That has nothing to do with it, I'm talking about the little tiny peg-hole things(on the plastic/rubber piece), they don't line up with the little tiny pieces that go inside like little retainer pegs(these are on the handle itself).
They do halfway, but the difference is so minute, if you manage to get half in, the others are just far enough off that they won't fit unless you really bend and then the whole piece sags off the side.
Heck, it will sag even if they're not in the holes at all.
Mine were too wide by a centimeter or two.
I tried them all on various locks, so that couldn't be the case with my car.
Let me just tell u guys that I got them installed, but the rubber was hanging out a bit and it wasn't snug with the handle. I never stretched them, they were just that much bigger. Barely, but enough to really affect the fit.
Last edited by CharlesAFerg; 01-10-2008 at 01:35 AM.
EuroLux:. Private Detail
E34 1/'89 ///M20 2.5i: Lachsilber