GO FISHING, use SLABSAUCE Fishing Attractant
Results 1 to 6 of 6

Thread: Driveshaft Vibration - gone??

  1. #1
    Join Date
    Dec 2003
    Location
    Los Angeles
    Posts
    197

    Default Driveshaft Vibration - gone??

    I had a slight vibration for a while that was diagnosed as driveshaft balancing issue (most likely). Car would vibrate from down below while accelerating through 2000 rpms in 2nd gear. Now, the problem is gone and car feels fine. Can the driveshaft magically rebalance itself?

    thanks,
    dave b
    dave b
    93 525i
    156k +

  2. #2
    Join Date
    Jul 2006
    Location
    El Paso TX
    Posts
    1,534

    Default

    no, but something stuck to or wrapped around the shaft can come back off.
    I once had to spend an hour scraping a melted plastic bag off the driveshaft on my DSM, just got very unlucky when I drove over it and it got sucked up onto the shaft and exhaust.

  3. #3
    Join Date
    Apr 2006
    Location
    Orlando, FL
    Posts
    137

    Default

    Dave,

    Interesting you bring this up. I have an intermittent driveshaft vibration as well. Now that it's getting colder, it seems to happen more frequently. Anyone know if this might this be the Guibo being as the rubber would react differently when cold vs. after it warms up?

  4. #4

    Default

    Quote Originally Posted by Gearhead
    Dave,

    Interesting you bring this up. I have an intermittent driveshaft vibration as well. Now that it's getting colder, it seems to happen more frequently. Anyone know if this might this be the Guibo being as the rubber would react differently when cold vs. after it warms up?

    That's what it was on mine, don't know if it was the weather or not but over a period of a few months would be there, then suddenly gone for a while. Had it replaced and was all good

    1989 E-Firty Tooring - 2.9
    1989 E-Firty For - 535is

  5. #5
    Join Date
    Apr 2006
    Location
    Orlando, FL
    Posts
    137

    Default

    Quote Originally Posted by weiss_535is
    That's what it was on mine, don't know if it was the weather or not but over a period of a few months would be there, then suddenly gone for a while. Had it replaced and was all good
    Thanks Weiss, looks like I know what I'm doing next week.

  6. #6
    Join Date
    Apr 2006
    Location
    Chicago, Il. U.S.A.
    Posts
    4,243

    Default

    Yup, mine looks like a lump of **** with bolts in it yet usually won't vibrate. I'm thinking every change from vibrating or not is probably another chunk shed from it. I'm hoping to nurse it a while longer.
    "The gas pedal wouldn't go to the floor if it weren't meant to be there"

Similar Threads

  1. Driveshaft Out - should I or shouldn't I?
    By Scott C in forum 5 Series BMW
    Replies: 4
    Last Post: 06-01-2009, 07:09 PM
  2. Driveshaft Vibration up to 20mph in 1st and 2nd gear
    By egrabruck in forum 5 Series BMW
    Replies: 9
    Last Post: 04-18-2008, 01:08 PM
  3. At my wits end with driveshaft vibration
    By stargazer_61 in forum 5 Series BMW
    Replies: 30
    Last Post: 10-27-2006, 07:44 AM
  4. Low speed/rpm vibration - Driveshaft ?
    By Derek A. in forum 5 Series BMW
    Replies: 5
    Last Post: 05-24-2006, 07:10 PM
  5. 633csi driveshaft vibration solved
    By Bruno in forum 5 Series BMW
    Replies: 4
    Last Post: 10-27-2004, 10:12 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •