I tried that but it feels like it's really bolted down, as if it's not supposed to be pulled up. I don't want to break it... ?Originally Posted by bubba966
I tried that but it feels like it's really bolted down, as if it's not supposed to be pulled up. I don't want to break it... ?Originally Posted by bubba966
-AJ
-Two E30s, an E34 and an E46-
You won't break it. Give it a good jerk up, one side at a time. The anchor points are on the front of the seat, on both sides.Originally Posted by Panzer Captain
And then to put the seat back in, I just push it down hard?
-AJ
-Two E30s, an E34 and an E46-
Originally Posted by Panzer Captain
nope, you must remove the transmission and rear wheels![]()
what a question, of course, just give it a good punch down and that's it![]()
As has been said you won't break it. Just yank it hard and it'll come.
You just need to make sure that the back of the seat bottom is tucked under the seat back a bit and that you've got it as far back as it'll go. Then push it down with some serious force, or hop on the seat over top of the two securing points to get them back down.Originally Posted by Panzer Captain
It'll make sense once you pull the seat off and see it all.
Cosmos Black/Black 1995 540iA M-Sport
BMW Individual Exclusive Edition, 1 of 65 total, 9/25/95 Build
Ok - thanks fellas for all the help!
-AJ
-Two E30s, an E34 and an E46-