right beside eleven.......usually
what am I missing?
I have these things - but, sitting here at work I cannot remember if there is a place that is obvious as to where they should go. I think somewhere on that baby tensioner thing, but any ideas for certain?
right beside eleven.......usually
what am I missing?
10/90 Build 525im, 630,000+km, Eibach/Sachs, Engine Rebuild
*RIP Oskar the DOG *
they slip over the threads of two studs and hold #11 onto the head.
10/90 Build 525im, 630,000+km, Eibach/Sachs, Engine Rebuild
*RIP Oskar the DOG *
oh, the studs aren't pictured in the realoem diagram
10/90 Build 525im, 630,000+km, Eibach/Sachs, Engine Rebuild
*RIP Oskar the DOG *
There is another chain guide in the timing cover (right side looking at the motor head-on) that has 2 studs it goes over, does this part not use any clips?
Are we talking uppper or lower cover? Those are the only clips I'm aware of.Originally Posted by Jon K
10/90 Build 525im, 630,000+km, Eibach/Sachs, Engine Rebuild
*RIP Oskar the DOG *
FWIW, they fit over the two longest upper time case cover studs in the pic below
10/90 Build 525im, 630,000+km, Eibach/Sachs, Engine Rebuild
*RIP Oskar the DOG *
'01 540it, 6/01
'03 325i 5 speed, 9/02
'10 535ix. 9/09
'10 mini 6 speed
'15 mini countryman 6 speed
yep all they do is hold the plastic thingie on the long studs
all america wants is cold beer warm cat and a place to take a poop with a door on it