Reply With Quotehave to remove it from underneath, definetly need ramps. pretty straight forward once you can see whats going on.
Major Contributor
94 540i foglight removal
how do you remove the drivers side foglight? i have a new one and want to replace it,
BTW I ordered from egermanparts.com tuesday night and when I got home today my package was already here. Maybe because they have a warehouse in NJ but thats pretty damn quick if you ask me.
Mark
1999 M3 Cosmos Black/ Black 78k
1994 540i Oxford Green/ Silver Grey Sold @ 133k
1995 M3 Arctic Silver/Black Sold @ 117k
1990 325i Zinnobar Red/Black Sold @ 115k
Green Beret Special Ops
have to remove it from underneath, definetly need ramps. pretty straight forward once you can see whats going on.
95 E34 530I V2.37
===========
Those who make peaceful revolution impossible will make violent revolution inevitable.
John F. Kennedy
2 Grand Master
I didn't need ramps to remove mine and I am LOWERED.... Its easy. one bolt holds the frame in place the other side has a ball fitted in the socket. Get under there and look at it i think its a 10mm bolt. i did it with a rachet in Bavarian Auto's parking lot a few weeks ago..
Last edited by Jehu; 09-21-2007 at 01:07 AM.
1995 540i Manual build 1/95
4 Grand Master
Fog light removal?.... Phht, peanuts, let my GF borrow your car.
Last edited by Ross; 09-21-2007 at 06:26 AM.
"The gas pedal wouldn't go to the floor if it weren't meant to be there"
Green Beret Special Ops
how??? smoke and mirrors?Originally Posted by Jehu
95 E34 530I V2.37
===========
Those who make peaceful revolution impossible will make violent revolution inevitable.
John F. Kennedy
3 Grand Master
Freaking pita without ramps when lowered. If yer lazy, just reuse the bracket
Big, Big Time Poster
Ramps!!!!!!!.....
First remove the toeing eye blanking covers next to the fog light. this is explained in the owners manual!!
there you shall see a small Phillips screw, undo it, pop. the fog-light is out!
job done..
Posting Permissions
