what do I do? pretty dangerous not to have any brake lights going on![]()
what do I do? pretty dangerous not to have any brake lights going on![]()
did you do a search? 27 threads on the subject.......
Originally Posted by taseal
M20 525/7 Bore: 84.50mm Stroke 81mm CR 8.5:1, blue printed/dyno & custom chip. Boost @ 6.5psi ~246hp @ 5300rpm / torque @ 269ftlbs. @ 4250rpm
brake light switchOriginally Posted by taseal
HID 5000k low 3000k fogs
dynaudio seps. mc intosh amp
ACS w/yokohama advan sport tires
Race logic TractionControl
![]()
alright, I searched...
what dumbs me out is
if the car knows i'm stepping on the brake, why give me an error about it? just put the damn brake lights on! lol
I've noticed that my car will sometimes throw the Brake Light message up at random. What I've observed one time was that the lights came on with just a minor delay after the brake was depressed and presto: Brake Light. My guess is that there is an issue somewhere between the brake switch and the lights. General control module? Light Control? I haven't looked closely into it yet.Originally Posted by taseal
I had a brake light circuit mesg in the past few weeks but all brake lights work fine. The washer fluid was low for a few weeks too but I didn't get a washer fluid low mesg. Anyway, I fill it up the washer tank today and the brake light circuit goes away. Now I get a Coolant level low mesg but the coolant level is actually fine. Go figure.
(SOLD) 92 525ia M50 | NGK plug | JVC AR560 | EAT chip | California
sometimes I just want to rip out all the sensors and be like 'fine! show me which one is ****ed up NOW BIATCCHHH'Originally Posted by bigtisas
![]()