GO FISHING, use SLABSAUCE Fishing Attractant
Page 1 of 2 12 LastLast
Results 1 to 10 of 17

Thread: Handbrakes 101

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Join Date
    Jan 2004
    Location
    Albuquerque, NM
    Posts
    953

    Default Handbrakes 101

    Too much time on my hands, aka don't feel like doing yardwork.

    Handbrake adjustment:

    1. raise both rear wheels off the ground

    2. release handbrake lever

    3. pry boot up & loosen cable adjuster nuts:



    4. remove one wheel lugbolt (not necessary to remove wheels)

    5. insert medium flatblade screwdriver into lugbolt hole

    6. engage blade into teeth of brass star adjuster wheel

    Note: When facing the left rear wheel, the star adjuster is approx. at the 4:00 o'clock position for an e32/e34. It is at about the 2:00 o'clock position for an e36.



    For the left wheel, push the end of the handle sideways to the left (toward the center of the axle). This will rotate the adjuster wheel in the opposite direction and will expand the shoes toward the drum. May take 6 or 8 clicks if it's been awhile.



    Turn the wheel periodically to tell when the shoes are making contact with the drum. When you think you have it, pull up on the handbrake to reset the shoes, and release the handbrake all the way. Turn the star wheel a few more clicks until it's firm. Back off in the opposite direction 2 clicks.

    Repeat on other side. For the right wheel, the star wheel will be at approx. the 8:00 o'clock position for an e32/e34, 10:00 o'clock for an e36. Pry the screwdriver AWAY from the axle to expand the shoes. Adjust the firmness the same as for the left wheel.

    When done with the wheel adjustment, tighten the handbrake cable adjuster nuts as evenly as possible until it takes 4 clicks of the handle ratchet to set the handbrakes. Some cables have a single nylon locknut, others have a 10 mm nut with a smaller 9 mm jam nut.

    The shoes may drag for a little bit but that should go away by itself. If they are too tight, loosen the star adjuster(s) another click or 2 or repeat the cable adjustment.
    Last edited by gale; 09-03-2007 at 04:15 PM.
    gale
    92 735i 5-spd, turbo project finally underway!


  2. #2
    Join Date
    Dec 2003
    Location
    Eastern Tennessee USi
    Posts
    14,839

    Default

    definetly in the archives!
    95 E34 530I V2.37
    ===========
    Those who make peaceful revolution impossible will make violent revolution inevitable.

    John F. Kennedy

  3. #3
    Join Date
    Dec 2005
    Location
    Brisbane Australia
    Posts
    1,447

    Default

    who drew the solid works models?

    Germans: Why can't they make everything?

  4. #4
    Join Date
    Jan 2004
    Location
    Albuquerque, NM
    Posts
    953

    Default

    Quote Originally Posted by rob101
    who drew the solid works models?
    Those are "Donco" specials. Like I said, too much time on my hands & didn't feel like doing yardwork
    gale
    92 735i 5-spd, turbo project finally underway!


  5. #5
    Join Date
    Jan 2004
    Location
    West Palm Beach, South Florida
    Posts
    1,011

    Default

    Yeah I was going to say with Don being an engineer, I have a feeling those photos werent fetched off of the internet

    Thanks Don, wish I had these the first time I disassembled my parking brake back when you were helping me but I got through it okay.
    93 525i / 01 330Ci / 98 Camry / 91 Volvo 240 / 99 Jeep GC

  6. #6
    Join Date
    Jul 2006
    Location
    ~30 Miles North of Chicago, Illinois
    Posts
    591

    Default

    Thanks gale, very nice
    [1994 530i/5-Speed]

  7. #7
    Join Date
    Mar 2007
    Location
    Liverpool UK
    Posts
    1,536

    Default

    Superb. I love the diagrams!
    1995 XJR: 4.0L S/charged straight 6 Auto

    What... It's not broken??? I can still fix it

  8. #8
    Join Date
    Feb 2007
    Location
    Minneapolis, MN
    Posts
    63

    Default

    Maybe we shouold all go over and do Gale's yard work. Thanks Gale.
    Last edited by mikeythekidd; 09-04-2007 at 03:47 PM. Reason: typo

  9. #9
    Join Date
    Mar 2005
    Location
    TORONTO
    Posts
    3,011

    Default

    Holy diagrams Batman! I didn't bother doing it before but now it looks so pretty and simple
    :: HIDCanada.com | Illuminating Your World


  10. #10
    Join Date
    Aug 2006
    Location
    Houston
    Posts
    241

    Default

    Now I have no excuse not to do this.. but it would have to be after I do my yard work

Page 1 of 2 12 LastLast

Similar Threads

  1. Handbrakes 101
    By gale in forum Wheels, Tires & Brakes
    Replies: 0
    Last Post: 09-03-2007, 02:08 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •