If it is the same problem my e36 had, the caliper has a "spring" that keeps it from rattling and it was missing. I'll look for a pic.
Hi All...
Been chasing a rattle. Pulled left rear and found that the pads seem to have some slop to them. No rear break BMW experience, but never saw anything like this before. I have always seen pads fit snug. It seems to have slop on the carrier and the caliper.
Don
1994 530it 147,000
1983 300SD 278,000 (running soybean oil)
1980 300TD 135,000 (running soybean oil)
If it is the same problem my e36 had, the caliper has a "spring" that keeps it from rattling and it was missing. I'll look for a pic.
# 7 in the diagram.
Herb,
I have the spring... but the pad can rock up and down (direction of wheel rotation) almost and 1/8" As though the slot on the pad is to large.
Thanks
Don
1994 530it 147,000
1983 300SD 278,000 (running soybean oil)
1980 300TD 135,000 (running soybean oil)
Don, I am at a loss, unless the supplier gave you the wrong pads?
I was not in the process of changing pads, but tracking down a couple of rattles in the rear.
From what I can see and again I have no experience with BMW brakes...
The pads to fit properly would require the metal plate to be 2 different sizes to accommodate the difference between the caliper and carrier.
I will call a BMW parts house tomorrow and find out if all the pads come one size or if someone makes an inner and and outer.
Don
1994 530it 147,000
1983 300SD 278,000 (running soybean oil)
1980 300TD 135,000 (running soybean oil)
Inner and outer are the same size.
"The gas pedal wouldn't go to the floor if it weren't meant to be there"
Ross your right....
I am going to do the rear brakes (Brembo rotors and Akebono Euro pads) and hope the the cross spring that inserts into the puck, along with the new anti-rattle spring solves the problem. If not ...there is always duck tape or silicone. (kidding)
1994 530it 147,000
1983 300SD 278,000 (running soybean oil)
1980 300TD 135,000 (running soybean oil)
While you're at it, grease the brakes as well to muffle the squeakingOriginally Posted by BIGRED
![]()
That's funny. Sadly I once witnessed a "mechanic" at a dept. store auto shop put anti sqeal compound on the friction surface of brake pads. Didn't stick around for the outcome.
"The gas pedal wouldn't go to the floor if it weren't meant to be there"