I bought the set of capacitors from fujioko and i noticed that only one of the capacitors matched the original capacitors, the one thats further on the right by itself.
Heres the lit of capacitors on my board:
(1)220pF 16v
(2) 22pF 40V
(2)220pF 10v
What i got were:
(1) 220vF 16v
(1) 1000vF 16v
(2) .22vF 50V
(1) 4.7 vF 100v
When I was putting back in cluster, the two connectors, the grey and white one were not connected and my right turn signal was on accidentally, at this time i noticed a small stream of smoke coming out of the cluster. and now the fuel, temp and check control screen with gear and odometer do not work. what happened here? i only replaced the one capacitor that matched values "220vF 16v" and one 22pF 40V with a .22vF 50V capacitor. Did i fry my cluster?
Reply With Quote