butyl will work fine.
Looks like the passenger window glass has separated from the track. Looks like they used some kind of epoxy to attach it. Where do I get this stuff?
Last edited by Kibokojoe; 04-09-2007 at 01:34 PM.
butyl will work fine.
95 E34 530I V2.37
===========
Those who make peaceful revolution impossible will make violent revolution inevitable.
John F. Kennedy
What the heck is Butyl. I have heard of butyl orings and things like that but is it available in a glue form? man never heard of that before
95 E34 530I V2.37
===========
Those who make peaceful revolution impossible will make violent revolution inevitable.
John F. Kennedy
Local mechanics told me to use windo weld super fast urethane 080609 for window repair. They said when I use this stuff make sure everything is aligned correctly I only get one chance/.....
Urethane glue should work okay too, make sure to clean the window and glide and then set it within the existant marks and let set 24 hours or whatever it says on the glue.
95 E34 530I V2.37
===========
Those who make peaceful revolution impossible will make violent revolution inevitable.
John F. Kennedy
Thanks for the info. Hope I can find the existing marks
Man that is one scarry picture.
once you get it cleaned up good you should see something, all else fails fill the seat with glue and carefully roll it up all the way. should self center for you pretty close.
95 E34 530I V2.37
===========
Those who make peaceful revolution impossible will make violent revolution inevitable.
John F. Kennedy
I am assuming there is an adjustment once the window is glued and set?
i doubt there might be much forward rearward action since the window comes with the bracket attached before it is installed...look for them marks, has to be some dirt around where it used to sit.
95 E34 530I V2.37
===========
Those who make peaceful revolution impossible will make violent revolution inevitable.
John F. Kennedy