starting problems no voltage to coil

[bill g]

12.02V indicates about 25% charged, not much use for anything. Try charging the battery and then re-test.
Another possibility is faulty ignition switch or related wiring.
You could try tracing back from the coil low voltage supply wire to find the problem but you really need circuit diagrams (such as in Bentley manual). First place to check is ignition switch - coil low voltage supply is green wire.

Bill G

[aquapool]

12.02V indicates about 25% charged, not much use for anything. Try charging the battery and then re-test.
Another possibility is faulty ignition switch or related wiring.
You could try tracing back from the coil low voltage supply wire to find the problem but you really need circuit diagrams (such as in Bentley manual). First place to check is ignition switch - coil low voltage supply is green wire.

Bill G

There is 11.51v coming off the coil low voltage supply on the ignition switch.
I would also like to thank you for your help on this problem. At the rate I'm going with all these repairs I hopefully will be able to contribute to this board soon.