GO FISHING, use SLABSAUCE Fishing Attractant
Page 2 of 2 FirstFirst 12
Results 11 to 20 of 20

Thread: My baby is running hot! Too HOT!!

  1. #11
    Join Date
    Dec 2003
    Posts
    597

    Default

    I bought a Nissen.

    No idea about repair shops, you could contact the BMW CCA guy in your area (scotthanf@hammerpatent.com) to see if he has anyone he can recommend. I thought there was a place there that did BMW and Volvo...Murray?

  2. #12
    Join Date
    Jul 2004
    Location
    Kernersville, NC
    Posts
    186

    Default

    Quote Originally Posted by Calico_NC
    thanks everyone for the input,
    To Stargazer:
    Do you know of any good mechanics around this area besides the dealer?

    Rickm: I think the plastic part at the top of the radiator is broken as well, because i noticed something cracked with steam and bubbles coming from it.

    Overall, what radiator would everyone recommend? Just a regular Behr or something different?
    Calico - I've been to Motorsport Connections in Winston a couple of times for parts. Nice people & reasonable prices.

    http://www.motorsport-connections.com/

    granit-silber (Ashley) had said once that there was a decent shop down 68 going towards High Point, but I can't remember where.

    Good luck!
    '95 540iA ~212k

  3. #13
    Join Date
    Mar 2006
    Location
    Montreal
    Posts
    239

    Default

    I would check if you have heat in the car, if the heater works. If not, it's probably the water pump, no circulation of the coolant, no heat inside. If so, expect to find this...

    Jeff
    Attached Images Attached Images  
    I prefer to be misunderstood rather than having to explain myself all the time...

  4. #14
    Join Date
    Oct 2006
    Location
    Reading, UK
    Posts
    1,853

    Default

    If it's overheating that quick it's likely to be exactly as Jeff/Montreal525 says... pull your waterpump and have a nosey...

    I had one of these b*stards fail after just six months... not impressed with it.

    EDIT: I only located its impeller blades when I took the head off a few weeks later and found them in the coolant rail at the back of the head. They'd managed to travel the full length of the engine :@

    With the small leak you've got, the engine shouldnt really be overheating that badly - it'll steam and run warmer than usual, but I'm wondering if the leak has been caused by overpressuring from a pump failure?
    Last edited by Ferret; 03-27-2007 at 07:22 AM.

  5. #15
    Join Date
    Mar 2006
    Location
    Greensboro, NC
    Posts
    200

    Default

    Quote Originally Posted by Montreal525
    I would check if you have heat in the car, if the heater works. If not, it's probably the water pump, no circulation of the coolant, no heat inside. If so, expect to find this...

    Jeff
    im going to look into this. I have to check and see.

  6. #16
    Join Date
    Mar 2006
    Location
    Greensboro, NC
    Posts
    200

    Default

    i think it is the water pump, because i tried turning on the heat, and the AC continued to blow cold air despite the car being hot. Is that diagnosis correct? Seems kinda fishy b/c i replaced that pump probably about a year ago i think. Oh well!

  7. #17
    Join Date
    Oct 2006
    Location
    Reading, UK
    Posts
    1,853

    Default

    Quote Originally Posted by Calico_NC
    i think it is the water pump, because i tried turning on the heat, and the AC continued to blow cold air despite the car being hot. Is that diagnosis correct? Seems kinda fishy b/c i replaced that pump probably about a year ago i think. Oh well!
    Yeah either you've got a massive airlock or your pumps busted bad... I'd have a nosey if I were you.

  8. #18
    Join Date
    Mar 2006
    Location
    Montreal
    Posts
    239

    Default

    I had a NEW one with plastic impeller (I had asked for a metal one but they installed a plastic one anyway....) and it failed after 6 months so....

    Jeff
    I prefer to be misunderstood rather than having to explain myself all the time...

  9. #19
    Join Date
    Mar 2006
    Location
    Greensboro, NC
    Posts
    200

    Default

    Quote Originally Posted by Montreal525
    I had a NEW one with plastic impeller (I had asked for a metal one but they installed a plastic one anyway....) and it failed after 6 months so....

    Jeff
    thanks everybody for the info, Just got a new Nissen Radiator, and it works like a charm. I guess it was just a bad airlock or something b/c the heat works flawlessly as well. Now on to trouble shoot that darn "1221" code on the dash.

    "Lord give me strength!"

  10. #20
    Join Date
    Dec 2003
    Location
    Eastern Tennessee USi
    Posts
    14,843

    Default

    vacume leak?
    Quote Originally Posted by Calico_NC
    thanks everybody for the info, Just got a new Nissen Radiator, and it works like a charm. I guess it was just a bad airlock or something b/c the heat works flawlessly as well. Now on to trouble shoot that darn "1221" code on the dash.

    "Lord give me strength!"
    95 E34 530I V2.37
    ===========
    Those who make peaceful revolution impossible will make violent revolution inevitable.

    John F. Kennedy

Page 2 of 2 FirstFirst 12

Similar Threads

  1. My New Baby...
    By GoldenEagleFan in forum 5 Series BMW
    Replies: 1
    Last Post: 03-15-2008, 02:18 PM
  2. My new Baby
    By mystical_wings in forum 5 Series BMW
    Replies: 43
    Last Post: 01-26-2006, 12:18 PM
  3. My New Baby
    By MTV in forum 5 Series BMW
    Replies: 14
    Last Post: 12-20-2005, 03:07 PM
  4. My baby
    By AllGo'n'Show in forum Virtual Car Show 2005
    Replies: 6
    Last Post: 11-13-2005, 11:51 PM
  5. My baby goes under the gun
    By bjl4776 in forum 5 Series BMW
    Replies: 10
    Last Post: 07-15-2004, 12:05 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •