Replaced fuel filter, found fuel leak

[Bill R.]

John, here is an old link that Neil Despande had posted a long time ago, its no longer on the web but the wayback machine still has it here
It takes a while for the pics to load from the wayback machine so be patient.
Its one of the better writeups around for changing the pollen filter.

Bill - I was asking about changing the Microfilter not the fuel filter.

[madjeff]

The hose size is 8mm or 5/16". It took me 9 feet of hose to replace every piece of hose from the pickup in the tank to the FPR in the engine bay. Make sure you get FI fuel hose and not regular carb hose (rated up to 30 psi I believe). Also, purchase FI fuel hose clamps as they will not crush the hose as much as the regular screw clamps will. Hope this helps.

Thanks for the info! I'll grab some today and redo the whole thing this week.

[John B.]

John, here is an old link that Neil Despande had posted a long time ago, its no longer on the web but the wayback machine still has it here
It takes a while for the pics to load from the wayback machine so be patient.
Its one of the better writeups around for changing the pollen filter.

Very nice write up/pics!! Thanks for the link.

[billb]

Bill - I was asking about changing the Microfilter not the fuel filter.

Simple to do. I use the same procedure Bill R. references. Works like a champ.