GO FISHING, use SLABSAUCE Fishing Attractant
Results 1 to 2 of 2

Thread: Frictions & steels -- frictions & steels . . .

  1. #1
    Join Date
    Jan 2004
    Location
    Albuquerque, NM
    Posts
    953

    Default Frictions & steels -- frictions & steels . . .

    ". . . I'm up to my elbows in frictions & steels . . ." Sing along with me now

    In the middle of a partial rebuild of my son's 89 535i 4hp22 doing the A & B clutchpack R&R. We bought it for cheap at the "lemon lot" cause it burped the torque converter seal & pumped ATF out of it faster than you can pour it in.

    So far everything is going fine, THANKS! to Winfred's write-up & a little coaching & parts from Kirt Koeller. So far we have the new bushing & seal in the pump & bolted back into the bell housing. Taking a break while the frictions are soaking & cleaning up the baskets. Should have the trans together in another couple hours & ready to put back in the car.

    Hope to get it running tonite or tomorrow depending on progress & available time before Superbowl. I'll update post again & let you know how it turns out.





    Cheers!
    Last edited by gale; 02-03-2007 at 03:08 PM. Reason: (added a couple preliminary pic's)
    gale
    92 735i 5-spd, turbo project finally underway!


  2. #2
    Join Date
    Dec 2003
    Location
    Eastern Tennessee USi
    Posts
    14,843

    Default

    you know the drill...pictures!

    hopefully it all goes real smooth and works right off the bat. Not too much in these grey mystery boxes huh?
    95 E34 530I V2.37
    ===========
    Those who make peaceful revolution impossible will make violent revolution inevitable.

    John F. Kennedy

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •