another problem along with my shimmy

[sirius_GTO]

So I've just ordered lemforder upper control arms and 750il Bushings for the 525i. This problem has been with me since mileage 215K and now it's at 245K.

The thing is, I'm not only getting the typical symptoms of shaking VIOLENTLY at 45-65 mph but I'm also getting WOBBLING at lower speeds from 10 mph to 30 mph.

if I'm turning and going at that slow speeds, I'll feel rhythmic tugging in my steering wheels.

Did I damage my bushings really bad and that's why I'm having these lower speeds problems as well?

Or did I damage something else in the meantime?

[rickm]

Have you had your tires balanced recently? I had a slight shimmy that was around after I changed my arms/bushings. Went to a local shop that had a Hunter balancer. Got everything rebalanced, no shimmy at all. Now I get a little on some roads but it's barely noticeable.

[Felixdacat]

Did you check to see if you lugs were loose on you wheels? also you might want to check the power steering fluid to see if it is low.

[sirius_GTO]

all of those sound like inexpensive fixes. I was looking more into major problems that could be causing this. What about Tie-rods? I notice when I jack up my car, I can move the wheels left and right about 1/2 an inch or so. Is this a sign that my tie rod is out? thanks

[Felixdacat]

Do you have a steering rack ( rack and pinion) or Steering box like my 89 535i? If rack. could be inner and outer tie rods, and if box. just might need to adjust the adjustment screw. Is there alot of play in the steering wheel? Always look at the easy stuff first. Saves alot of money, and time.

[632 Regal]

nut behind the wheel, any play will cause a wobble. I think the slow speed deal is from a bent wheel or out of round tire.

[Tiger]

I suspect your lower control arm bushings are shot too... typical... so if you are doing upper control arms. you might as well do the lower control arms too.

[sirius_GTO]

ahhh you're shitting me...

what are symptoms of lower control arm failure? I don't have the money to replace all of these things. :*

I've ordered the Upper control arms with 750i bushings and the flennor tie rods. I guess I'll see if I need the lower control arms too

[632 Regal]

LOL the control arms generally last 2x as long as the thrust arm bushings...

ahhh you're shitting me...

what are symptoms of lower control arm failure? I don't have the money to replace all of these things. :*

I've ordered the Upper control arms with 750i bushings and the flennor tie rods. I guess I'll see if I need the lower control arms too

[sirius_GTO]

So you're saying that I don't need to replace my lower control arms? sorry if I misunderstood.