1991-525i
How do you diagnosing/correcting windshield washer fluid pump?
# reservior is full
# I can hear the pump is running
But it won't pump the fluid on the windshield
Thanks!!![]()
1991-525i
How do you diagnosing/correcting windshield washer fluid pump?
# reservior is full
# I can hear the pump is running
But it won't pump the fluid on the windshield
Thanks!!![]()
A cracked hose is probably soaking your hood/bonnet insulation instead of spraying the windshield. Look for that. If that isn't it, pull the tank and remove the hose; run it and verify that it pumps. There's nothing magical or complex in this system -- use common sense.
1997 535i V8
5spd, OBC, A/C, cruise, BMW phone, factory M-Tech wheel & suspension, 18" Alpinas
the other thing to check is the nozzle end -- if the littel squirting orifice is gunked up then nothing comes out. if there is fluid present right up to the nozzle, and therefore nozzle is culprit, then gently use a sewing needle to see if you can free up the opening.
I had the same problem. Nozzle ends were blocked by car wax from the last owner. You need a very small needle. I just went to supermarket and got one of those green wire in the vegetable/fruit section.
(SOLD) 92 525ia M50 | NGK plug | JVC AR560 | EAT chip | California