Quote Originally Posted by bbig119
You won't have a sword, but it could be the resistor pack. I had intermittant blower problems which occurred when I tried to use any other blower speeds other than 4. I would get air(cold air since it was summer) for a short while then it would cut out for a couple minutes then come back again. Replacing this resistor pack fixed my problem. Sounds like your symptoms are a little different though.
Forgive my ignorance since mine has a sword, but do resistor packs have an analogous connector portion that could be susceptible to bad/cold solder joints like swords sometimes suffer from? If so, then it would be a simple DIY to reflow the solder -- worth a try.