Reply With Quotetimes in the past.
Originally Posted by Boone.Msi
Major Contributor
What size fuel injectors are in the M60 530i?
ive looked everywhere and i cant find any info. I might be going with the ford bosch injectors so i would like to see what size i need?
are they the same size as the 540i injectors?
thanks
1995 BMW 530ia/3.15lsd/M Parallels/Eibach/Bilstien/Magnaflow
Super Moderator
If you had done a search you would find that i have posted it many
times in the past.
Super Moderator
From the sounds of your last post you still haven't changed the
pcv plate and the intake manifold gaskets? if so ,this could be the cause of all your problems. Also have you done a compression check ? Is it a nikasil block?
times in the past.
Major Contributor
yea i did a search i guess i just didnt put it in right cause i know i came across this before. correct, i have not done the pcv, o rings or gaskets yet. i just figured that i would find out what injectors they are in case when i pull the intake manifold they look gunked up.
I have very little time on my hands so i doubt that i will even have this done untill monday. thanks for your help
by the way, how the hell am i supposed to convers 4 milliliters an hour into x lbs. per hour?
1995 BMW 530ia/3.15lsd/M Parallels/Eibach/Bilstien/Magnaflow
5-10 Grand Master
Huh? 440cc injectors are = 42#.... so 240 are prob 22# about. I bet its the same injector as on a '95 M3
Conversion to lb/hr (corrected)
Sorry, I had this posted in error earlier. The following should be correct:
Gasoline is about 0.68 gm/cc, so 240 cc/min is about 163 gm/min or about 9.8 kg/hr. At 2.2 lb/kg, this is about 21.6 lb/hr.
Hal
Last edited by Hal; 10-28-2006 at 09:06 PM.
Major Contributor
hmmm, what would you guys say to me getting the #19 injectors? would that make it too lean? Im heading to an all ford mustang salvage yard with a friend on monday for his car so i figured i would just get some injectors from there. are the #19's out of mustang gt's? what car should i pull from the GT or cobra?
1995 BMW 530ia/3.15lsd/M Parallels/Eibach/Bilstien/Magnaflow
3 Grand Master
take a look at this
Check these guys out.
http://www.fiveomotorsport.com/Injector_SetsBMW.asp
You can cross the ford injectors with their tables.
Last edited by Blitzkrieg Bob; 10-28-2006 at 01:34 AM.
Vee ave vays of dealing vid your kind...........
Grand Master
get the mean greenies.
Alusil, Dinan DME | ITG Air Filter | Eibach/Bilstein HD | 26/20 Swaybars | Iridium plugs | Depo/ProLumen HID | Optima batt. | no AC | Stoptech brake lines, Frozen rotors, brass bushings, Superblue
5-10 Grand Master
By green do you mean 42#? What the HELL is he going to do with 42# injectors.
Posting Permissions
