GO FISHING, use SLABSAUCE Fishing Attractant
Results 1 to 6 of 6

Thread: putting out a call for the following various BROKEN parts ...

  1. #1
    Join Date
    Jan 2004
    Location
    Benneton (United Colors of)
    Posts
    3,067

    Default putting out a call for the following various BROKEN parts ...

    we can discuss how much you want for them and shipping if you have them. I am looking for BROKEN items, for which i can write repair procedures for, or at very least, produce cutaways of.

    front or rear shock absorbers (pair)
    the m20/m50 radiator coolant level sensor
    windshield washer fluid level sensor
    fuel pumps
    front sway bar links
    (maybe) rear sway bar links
    thrust arms with broken or dying ball joints (no bushing needed)


    i'm not sure how much of this stuff i'll actually end up needing, but if you have it in your garage as an artifact, and don't care about parting with it, i'll at least see if i can make an acceptable offer for it.
    "..Torchinski v. Peterson that it is legal to carry a concealed weapon, so long the weapon is totally slick like a huge ass machine gun that you carry under a trench coat, like in the Matrix."


  2. #2
    Join Date
    Dec 2003
    Location
    Eastern Tennessee USi
    Posts
    14,843

    Default I have some paperweights

    front shock absorbers (pair)

    front sway bar link (1)

    thrust arms with broken or dying ball joints w bushings (pair)


    there yours for shipping costs.
    95 E34 530I V2.37
    ===========
    Those who make peaceful revolution impossible will make violent revolution inevitable.

    John F. Kennedy

  3. #3
    Join Date
    Jan 2004
    Location
    Benneton (United Colors of)
    Posts
    3,067

    Default i guess i got

    an appointment with a tank of n2 and a couple of containers of shock oil then....yer pm queue, if you please.
    "..Torchinski v. Peterson that it is legal to carry a concealed weapon, so long the weapon is totally slick like a huge ass machine gun that you carry under a trench coat, like in the Matrix."


  4. #4
    Join Date
    Dec 2003
    Posts
    868

    Default Why haven't you gotten rid of that car yet?

    just a serious question

  5. #5
    Join Date
    Jan 2004
    Location
    Benneton (United Colors of)
    Posts
    3,067

    Default

    rid of it? most of the stuff i've had to do to it I consider somewhat routine.


    headgasket
    water pump+thermostat
    1 tow for an icv hose that blew off
    flex disc
    new battery+ engine computer after sitting out exposed in the elements for 1 fla summer
    1 used fuel injector and 1 coilpack
    voltage regulator
    run of the mill inspection II stuff, microfilter &c.
    regular oil changes

    (not too regular)
    wire harness in tranny needed soldering
    screwdriver in shift hardware at transmission needed extricating
    cleaned shifter switch
    the shift plate thingy is broken, so i'm looking for salvage
    2 headlight bulbs
    intermittent defective washer fluid sensor
    coolant sensor defective if driven for more than an hour at highway speeds
    55-65 mph shimmy (so the bushings are ready to be replaced)
    one side sway bar link (unlikely, but i want to take it off and refurb the joint if possible and check clearances+ play on the ball)
    shock absorbers in there are not to my mom's liking, so she won't ride in the car if i'm in town, creating a lot more hassle than you would think, or that i can explain

    2 door panels need adhesive
    headliner is sagging

    as much as i bitch about the car, and despite it having been in the shop for a long time for the HG, i've put 11,000 miles on the car in 6 months, despite me taking the bus to school every day (it doesn't necessarily get driven every day), and netted an average of 21.1 mpg during that time. i know the problems with it, and if i'm responsible for remunerating myself for labour costs, they are well worth it in my opinion, and i haven't spent more than 500 on parts yet.

    the parts i'm asking for are ones that are going to be dissected and tried on my car before i attempt repairs on the ones on mine, as some are high risk (balljoint replacement, shock absorber r+r), there's a high likelihood i might destroy them, that's why i want other ppl's defective units. most of my desire to dissect such things is derived from my own personal curiousity, not necessarily because my car needs them.


    regular oil
    Quote Originally Posted by Scott H
    just a serious question
    Last edited by ryan roopnarine; 04-12-2004 at 12:25 PM.
    "..Torchinski v. Peterson that it is legal to carry a concealed weapon, so long the weapon is totally slick like a huge ass machine gun that you carry under a trench coat, like in the Matrix."


  6. #6
    Join Date
    Jan 2004
    Location
    NY
    Posts
    478

    Default

    I have:

    front sway bar links
    rear sway bar links
    thrust arms with bushings

    all are in good condition though... lmk if you need them.

    Custom Turbocharged 1991 535iM - 135k mi.

Similar Threads

  1. Last call for parts car in Chicago
    By Ross in forum 5 Series BMW
    Replies: 1
    Last Post: 04-21-2008, 11:48 AM
  2. Last Call for Parts! 1992 E34
    By Evan in forum 5 Series BMW
    Replies: 17
    Last Post: 06-17-2007, 08:43 PM
  3. wanna know the easiest way to get broken parts to work?
    By indierthanthou in forum 5 Series BMW
    Replies: 4
    Last Post: 03-02-2007, 11:56 AM
  4. Broken rockers cyl. head off, 56k beware - pics of parts
    By Dave535Phoenix in forum 5 Series BMW
    Replies: 10
    Last Post: 01-10-2005, 07:34 PM
  5. Replies: 17
    Last Post: 05-11-2004, 09:49 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •