range calibration!
i need that bad, it says i have like, 580miles after a fillup, but..... thats just not possible unless im getting almost 30mpg ALL THE TIME!
http://home.iae.nl/users/bts/obc.htm
Kai from the German E34 board informed that these are not correct:
1. #06 is not "Amps", it's the measured current fuel in tank (in litres). Works only if ignition is on.
2. #07 is not "% of full", it's the calculated (!!) current fuel in tank.
3. #09 is the current voltage at terminal 15 (not terminal R!), so you have to turn the ignition on.
4. #10 has absolutely nothing to do with something like speedometer correction, it's for the range calibration.
range calibration!
i need that bad, it says i have like, 580miles after a fillup, but..... thats just not possible unless im getting almost 30mpg ALL THE TIME!
Alusil, Dinan DME | ITG Air Filter | Eibach/Bilstein HD | 26/20 Swaybars | Iridium plugs | Depo/ProLumen HID | Optima batt. | no AC | Stoptech brake lines, Frozen rotors, brass bushings, Superblue
Thanks for the link!
Thanks for all the info.
My 540 will not respond to a "stomp test."
Is there another way for me to find out why my check engine light keeps coming and going?
Cheers,
Evan
1994 540ia|Oxford Green Metallic|Lemforder|KYB in H&R|18" OE Staggered M-Parallel with Pirelli P-Zero
WOW, Built in speedo calibration!!!
I never knew one could use it to calibrate the speedo.
Does anyone have non-stock sized wheels on their e34??? Have I been missing something???? Why don't we rant and rave about this?
Join the Aussie 540i LE yahoo forum
08/88 535i e34 M30+miller MAF, 'stiens, tints & teeth!
Heya Shogun ... so you're saying we cannot calibrate our speedo? DamnOriginally Posted by shogun
I wish I could do that, but thanks for the codes and corrections. Good info!
![]()
Cos someone dosen't read posts proeprly i guess. Doh!Originally Posted by genphreak
I'll have to try this function out so will let you know Erich.Nick
Join the Aussie 540i LE yahoo forum
08/88 535i e34 M30+miller MAF, 'stiens, tints & teeth!
Can we "program" these new codes into our dash display to bring 'em up when we press the turn indicator stalk - so that they're always available? Just too lazy to try, so thought I'd ask.Originally Posted by shogun
![]()
Same Problem with the check engine and stomp test.Originally Posted by Evan
"Bump"
1994 540i Auto
live fast; die sideways
13.3 @ 104mph (not in the 540)
15.4 @ 150 Kph in the 540 (24/9/07)
Australian cars do not have a possibility for a stomp test, only U.S. specification cars.
But you can do that by adding some wires. I have once posted that.
MOTRONIC to cluster and installing the bulb in the cluster. Wiring depends on the MOTRONIC, and not all years of production possible.
I only have the details for the M70 V12 MOTRONIC.