range calibration!
i need that bad, it says i have like, 580miles after a fillup, but..... thats just not possible unless im getting almost 30mpg ALL THE TIME!
http://home.iae.nl/users/bts/obc.htm
Kai from the German E34 board informed that these are not correct:
1. #06 is not "Amps", it's the measured current fuel in tank (in litres). Works only if ignition is on.
2. #07 is not "% of full", it's the calculated (!!) current fuel in tank.
3. #09 is the current voltage at terminal 15 (not terminal R!), so you have to turn the ignition on.
4. #10 has absolutely nothing to do with something like speedometer correction, it's for the range calibration.
range calibration!
i need that bad, it says i have like, 580miles after a fillup, but..... thats just not possible unless im getting almost 30mpg ALL THE TIME!
Alusil, Dinan DME | ITG Air Filter | Eibach/Bilstein HD | 26/20 Swaybars | Iridium plugs | Depo/ProLumen HID | Optima batt. | no AC | Stoptech brake lines, Frozen rotors, brass bushings, Superblue
Thanks for the link!
Thanks for all the info.
My 540 will not respond to a "stomp test."
Is there another way for me to find out why my check engine light keeps coming and going?
Cheers,
Evan
1994 540ia|Oxford Green Metallic|Lemforder|KYB in H&R|18" OE Staggered M-Parallel with Pirelli P-Zero
WOW, Built in speedo calibration!!!
I never knew one could use it to calibrate the speedo.
Does anyone have non-stock sized wheels on their e34??? Have I been missing something???? Why don't we rant and rave about this?
Join the Aussie 540i LE yahoo forum
08/88 535i e34 M30+miller MAF, 'stiens, tints & teeth!
Heya Shogun ... so you're saying we cannot calibrate our speedo? Damn I wish I could do that, but thanks for the codes and corrections. Good info!Originally Posted by shogun
Cos someone dosen't read posts proeprly i guess. Doh!Originally Posted by genphreak
I'll have to try this function out so will let you know Erich. Nick
Join the Aussie 540i LE yahoo forum
08/88 535i e34 M30+miller MAF, 'stiens, tints & teeth!
Can we "program" these new codes into our dash display to bring 'em up when we press the turn indicator stalk - so that they're always available? Just too lazy to try, so thought I'd ask.Originally Posted by shogun
Same Problem with the check engine and stomp test.Originally Posted by Evan
"Bump"
1994 540i Auto
live fast; die sideways
13.3 @ 104mph (not in the 540)
15.4 @ 150 Kph in the 540 (24/9/07)
Australian cars do not have a possibility for a stomp test, only U.S. specification cars.
But you can do that by adding some wires. I have once posted that.
MOTRONIC to cluster and installing the bulb in the cluster. Wiring depends on the MOTRONIC, and not all years of production possible.
I only have the details for the M70 V12 MOTRONIC.