so you have no relays in????
the car wont start...
the starter is cranking but it wouldnt continue...
it seems that the fuel wont push...
fuse 17 and 23 are ok...
what could possibly be wrong...
also, some prick who checked the wiring removed the relays and forgot how to put them back in... is there a diagram to which colors go to which relay positions?
thanks!
(m20 525i 1990)
so you have no relays in????
Gone but not forgotten
the relays are in... it fired up yday... but it seems that today...Originally Posted by Paul in NZ
its encountering the same problem of not turning on
anyone?
do an inline pressure test for the fuel, if you are getting fuel pressure, check for spark...
if you are getting fuel and spark, then the crank sensor is probably toast.
Alusil, Dinan DME | ITG Air Filter | Eibach/Bilstein HD | 26/20 Swaybars | Iridium plugs | Depo/ProLumen HID | Optima batt. | no AC | Stoptech brake lines, Frozen rotors, brass bushings, Superblue