Washer fluid low

[fclake]

You can kill that thing easily. Just bridge the 2 cables in the plug for the sensor.
Then it should be no alarm. If you still get the alarm, then one of the 2 wires is broken from the plug to the check control module. I just repaired that on my car last weekend. Very thin cables, they usually break close to the plug.
I resoldered the wire.

I just did that,worked fine thanks alot. Ian

[LennyChanler]

I agree, as that is one of the easiest DIY jobs there is. Heck, even I changed out that sensor in my 525i all by myself.