Is it best to lift the motor up or drop subframe? Do I just undo the front engine mounts and lift up or do I need to screw with the trans mounts to et the right angle? About how far does the motor need to come up?
5-10 Grand Master
When doing M50 oil pan...
Is it best to lift the motor up or drop subframe? Do I just undo the front engine mounts and lift up or do I need to screw with the trans mounts to et the right angle? About how far does the motor need to come up?
5-10 Grand Master
no body?
5-10 Grand Master
easyer to jack it up and put some wood blocks under the motor mounts to make it sit higher
all america wants is cold beer warm cat and a place to take a poop with a door on it
Big, Big Time Poster
Yeah it was a major pain in the ass on my M50TU even with it jacked up :\
NovceGuru
1993 525iA M50TU
Black on Black...need pics
208,888 miles
5-10 Grand Master
Do i have to drop the oil pump?
5-10 Grand Master
depends on how high you can get the motor, i do a **** load more m30s where you do need to drop the pump, i can't remember if you can get away without it on the m50, it's not a big deal if you do though
Originally Posted by Jon K
all america wants is cold beer warm cat and a place to take a poop with a door on it
Posting Permissions
Reply With Quote