Here's how to program instr cluster LCD screen
Programming the instrument cluster's LCD to display OBC functions when using the turn signal stalk:
1. turn on ignition (position 2)
2. press the turn signal lever toward the steering column and hold for 3 seconds until PROG 1 appears in the display
3. Press the desired OBC function(s) you want to appear on the LCD display (example, I only have time, temp, and range programmed into my LCD display) The order in which function you pick will be the order they appear when you use the "remote" method.
4. press the S/R button on the OBC to set your "program"
To cancel the programmed info on the LCD display...press the turn signal lever in for 3 seconds until the PROG 1 appears in display...then press the S/R button on the OBC.
Pressing the stalk on the instrument cluster (little Check Control stalk on the right side) extinguishes what's displayed in the LCD display...or you can press the CODE button on the OBC to extinguish the LCD display.